GSR TYPE 43
GSR TYPE 43
Force Pilot Operated, diaphragm design
2 way NC / NO
MOC: Brass/ SS
Pipe Size: 1/4” to 2”
Pressure: 0 to 16 Bar
Coil: AC/DC & W.P/Ex-Proof
Showing 19–27 of 57 results
-
-
GSR TYPE 63
GSR TYPE 63
Direct acting, Angle seat valve, Poppet design
2 way NC / NO/ Double acting actuator
MOC: Brass / SS/ Red Brass
Pipe Size: 1/2” to 3”
Pressure: 0 to 40 Bar
Coil: AC/DC & W.P -
GSR Type 73
Direct Acting 3/2 way Universal
MOC: Brass / SS
Pipe Size: 1/4” to 2”
Pressure: 0 to 20 Bar
Coil: AC/DC & W.P / Ex Proof -
GSR Type 78
GSR Type 78
Direct operated, Poppet design
3/2 way NC / NO
MOC: SS / Red Brass
Pipe Size: ½’’ to 2’’
Pressure: 0 to 40 Bar
Coil: AC/DC & W.P -
GSR Type 90
GSR Type 90
Pressure controlled Direct Operated
2 way NC/NO
MOC: SS
Pipe Size: 1/4” to 2”
Pressure: 0 to 16 Bar -
GSR Type-91
Force Pilot Operated, Piston Design
2 way NC / NO
MOC: Brass / SS
Pipe Size: 1/4” to 2”
Pressure: 0 to 40 Bar
Coil: AC/DC & W.P/Ex proof -
GSR_DB Hall Effect Sensor – Position Indicator
GSR_DB Hall Effect Sensor – Position Indicator
Supply voltage : 12 — 24V DC
Voltage tolerance : -20% / +20%
Power consumption : 30mA
Electrical connection : M12 x 1 / 5-Pin
Thread connection : G 1/8 (others on request)
Output signal : Output signal similar to supply voltage
Protection : IP65 acc. to DIN EN 60529
Ambient temperature : – 40 °C / + 80 °C
Solenoid coils : System .012 and .032
Housing material : Stainless steel 1.4301 / 1.4105
Feature : Integrated reverse polarity protection and overvoltage protection
-
ISO Pneumatic Cylinders
type Single and double acting pneumatic cylinders, with or whithout adjustable cushioning, with or without magnetic piston Standards ISO 15552-VDMA24562 Rated temperature -20…80 °C (-4…176 °F) Fluid Temperature Max. 80 °C (176 °F) Medium Filtered compressed air with or without lubrication Pressure 0.5-10 bar Body Material Aluminum pressure die cast end caps and piston, hard anodied profile aluminum tube, PUR seals (NBR for Ø125 to 250), Piston guide in acetal resin (NBR for Ø200 and 250)
-
Jefferson 1388
Fast or Slow opening and Fast Shut off for Combustibles and other gases
Normally Closed
Direct Acting. No minimum differential pressure to operate
High Flow designs
Aluminum Body
Size: 3/4″ to 3″ NPT (BSP upon request)
Pressure: Low and High Pressure Versions
Diaphragm: Buna N seats
Coil: Class H 356F with internal housing terminals to connect wires
Fast (standard) or slow opening (adjustable):
1st Stage: Quick opening from 0 to 80% of the total adjustable stroke.
2nd Stage: Adjustable opening up to 20 seconds, from the end of stage 1, up to
full stroke.
Shut off is always less than 1 second (not adjustable)